9 (More) Ways To Access Blocked Websites 2021 Tips – BollyInside

This blog is about the 9 (More) Ways To Access Blocked Websites. We will try our best so that you understand this guide . I hope you like this blog 9 (More) Ways To Access Blocked Websites. If your answer is yes then please do share after reading this.

Check 9 (More) Ways To Access Blocked Websites

There are many reasons why authorities block access to certain websites. Some workplaces may block social networking sites or access to your personal email. You may also experience crashes at your university, college, or school.

If you are in this situation and you are looking for a workaround that you can apply to overcome this crash, don’t worry, we have 9 ways you can try.

Here we have listed 9 methods that you can try, because different types of blocks require different types of techniques to avoid them. Try each of them to find one that works for your situation. And if you have other methods that you would like to share with other readers, please use the comment section.

back to menu ↑

1. Access via IP instead of URL

Some software blocks website pages only by name or URL. For example: a block can be applied on www.facebook.com but not on the website’s IP.

You can get Terminal IP in OS X or Command Prompt if using Windows. Insert this and press Enter.

ping yourdomain.com

Copy the IP shown in the results in your browser’s address bar and open the site as usual.

back to menu ↑

2. Use a proxy site

There are many free web proxies that provide services for browsing the web anonymously. You can use them to easily access any blocked site. Just go to the website and enter the URL you want to browse.

How does this work? When you browse a website using a proxy site, you are not actually connected to that website. You are connected to the proxy server, while the proxy server is the one that is connected to the actual destination of the website. What you see is the cached version of the site provided by the proxy server.

You can try Proxysite or Proxery, but if you want more options, check out Newproxysite.

back to menu ↑

3. Use a VPN service

A virtual private network or VPN is a remote server that gives you private access over a public network. VPN makes it appear that you are browsing from the country where the server is located, thus hiding your real identity.

There are many VPN service providers that you can use, some offer services for free, others require a subscription. Hello, it’s my favorite free VPN service. It allows you to browse privately and uncensored, and it has a browser extension for Chrome and Firefox users.

There are also many great paid VPN services that you can use. Find the best in this list.

back to menu ↑

4. Use the TOR browser

Tor is a browser that allows you to browse anonymously, prevent your browsing habits or your location from being tracked, guaranteeing privacy. Thanks to volunteers from around the world who create this distributed network of relays, you can surf under the protection of Tor.

To use it, you first need the Tor Browser; install it as a regular application. Open the application, then click Connect to start your connection to the Tor network.

back to menu ↑

5. Use of ISP’s public DNS

Some Internet Service Providers (ISPs) use their own DNS to block access to some websites. To open the block, you can bypass the ISP restriction using Google Public DNS.

In your network’s DNS settings, change your DNS to the following Google Public DNS IP addresses as your primary or secondary DNS server.

IPv4

8.8.8.88.8.4.4

IPv6

2001: 4860: 4860 :: 88882001: 4860: 4860 :: 8844

back to menu ↑

6. Use of Google Translate

Google Translate allows you to translate website content from one language to another. But you may not know is that if you enter the URL of a blocked site into Google Translate, then click the URL link on the right hand side, the blocked site will be accessible in the translated language you chose.

Click View: Original to revert to the version with the original pre-translated language.

Here you can do the trick by entering the URL of the blocked site into Google Translate, then click the URL link on the right hand side and let it show the magic. The blocked site will open with the translation language. Then you can click view: Original to preserve the original language.

back to menu ↑

7. Manual configuration of your browser’s proxy

To manually configure your browser proxy, you must first get working public proxies. Find one at Hidemyass. There are many listed there, from countries around the world, along with speed, type, and level of anonymity. Take an IP address and the port, then:

back to menu ↑

For Firefox:

To go Preference > Advanced and choose the tab Network. Below Connection click Settings, then choose Manual proxy settings.

Here, you enter the HTTP proxy obtained from Hidemyass, followed by the port number and click okay.

back to menu ↑

For Chrome:

If you want to configure the proxy only for Chrome, you can use Proxy Helper.

back to menu ↑

8. Edit hosts files to omit the website’s IP address

You can use this Pentest Tools service to obtain the IP address of the domain and subdomain of a blocked website. Just insert the domain name and check ‘Include subdomain details’ and click START, then wait while the tool does the work for you.

When done, copy the IP address and domain / subdomain.

If you are using Mac, in Terminal, type

sudo nano / private / etc / hosts

Scroll down to the open hosts file and paste the IP address right there. Press Control + X and then Y to save the file.

back to menu ↑

9. Use SSH tunnels

First of all, you must have an SSH account. Open Terminal (if you are using Windows you can use Putty instead) and run the following command to login:

ssh -D 12345 [email protected]

The command will run the SOCKS server on port 12345. You will be prompted for a username and password. After a successful login, just minimize the terminal, don’t close it.

Next, open your Firefox browser and go to Preferences> Advanced> Network> Configuration. Check into Manual proxy settings, enter 127.0.0.1 in SOCKS hosts and insert the port number you chose when you created the SSH tunnel. Click OK to save your new settings.

Then open a blank tab and type ‘about: config’, then set certain for the following statement:

network.proxy.socks_remote_dns

Now you can navigate with Firefox using your tunnel. For a more detailed tutorial, check out the full tutorial here.

back to menu ↑

Final words: 9 (More) Ways To Access Blocked Websites

I hope you understand this article 9 (More) Ways To Access Blocked Websites, if your answer is no then you can ask anything via contact forum section related to this article. And if your answer is yes then please share this article with your family and friends.

Source of this news: https://www.bollyinside.com/articles/9-more-ways-to-access-blocked-websites/