An overview of GFChipCalc: HOC Calculator and also Optimization Tool – GamePress

NOTICE: 100% on the preset DOES NOT NECESSARILY FOLLOW 100% stat gain for that board. It means you have the right chips to fully fill out all preset, hence you’ve 100 percent filled out the preset, as opposed to that the HOC has hundred percent maxed stats in all method chip stats. Some HOCs (BGM, 2B14, and AT4) do not have this capability to completely their board.
 

GFChipCalc provides some presets   simple let’s go in depth a bit more they are. There are technically a few different presets: Default Betting, Preset, Stat, and Details.

Traditional Stats try out balance out your stats, exactly which you’ll only want into the three aforementioned HOCs may possibly reach 100%: AGS, M2, and QLZ.  

Stats   evaluates based on the Stats you’ve picked below the surroundings.  

Points preset is a bit trickier. By using the Stats button inside the right of the Sort spelunke (umgangssprachlich) (usually will say Unsorted), it is going to convert the value of stats of this tile into Points, in order to say, how many tile grids each individual Stat on a snack takes up. Stick with Presets or perhaps Stats over this unless you know what you’re doing.  

The Presets preset is basically what it offers: it’s based on the developer’s judgement for the a large amount of optimal chips available for several types of boards you want to begin using . Each board functions point limit and because of the same, you cannot maximize the stat allocation for them if their betting are fat enough, take delight in BGM and 2B14 this require more tiles never ever there exist on their get aboard to cap their stats.

Wht is the preset setting does happens to be separate those stats here in points (in BGM’s lawsuit, 36 points) and try to benefit from00 it on chips. The actual Preset indicators are based on stages per stat, so it is Lethality-Pierce-Precision-Reload . A sample is BGM’s 13-10-10-3 (5B-6), which will use Type 5B-6 chips to allocate points to 13 points in Lethality, 10 Points in Pierce, 10 Points in Precision, and step three Points in Reload.

Note: Routinely keep Chip Filtering “on” if you plan to use the layout as your QUITE board. Turn it off when it comes to filling normally.

The best Presets for HOCs that can’t reach full are:

16/10/7/3 for BGM (stats to get 189 / 328 /140/43)

20/2/4/6 for 2B14 (stats literally 226 /58/80/ eighty five )

14/8/9/5 for AT4 (stats appearing 166 / 260 /170/65)

17/9/7/5 for MK 153 (stats being 195/273 /140/75)

Numbers in BOLD should be the stats that should be capped perhaps NEAR capped,  

These are the numbers you should end up with, sans Once again install. For Reload, these are typically the minimal stats to have the greatest possible Reload at Max Version.  

Generally speaking, you’ll want to run Numbers or Presets except for three 100% HOCs.  

And there going, you’re set!

Source of this news: https://gamepress.gg/girlsfrontline/guide-gfchipcalc-hoc-calculator-optimization-tool